Filter
Top Products
70 7170 71
Video System
Use this feature to switch the video system from either NTSC
or PAL.
1. Select Video System in the Transmission menu, then
press Right.
2. Use the Up/Down navigation buttons to select NTSC or
PAL. Then press the
button to conrm.
The video output signal can be switched to NTSC or PAL to
accommodate dierent regional TV standards. The appropriate
setting will vary between regions.
NTSC: USA, Canada, Taiwan, Japan, etc.
P
AL: Europe, Asia (excluding Taiwan), Oceania, etc.
Not
e: The TV output will not display properly if an incorrect
video system is selected.
This camera supports wireless connection of an Eye-Fi SD
Card. Upload the photos from the camera to the Internet using
the following steps:
1.
Press
func
menu
button to select set menu, then enter connection
menu to select Eye-Fi, select ON.
2. Photos taken after this setting is enabled will be
automatically uploaded to the internet. Please refer to the
Eye-Fi SD card instructions and settings for further details.
Set Eye-Fi SD Card Connection Mode