Filter
Top Products
38
Recording Video Clips Directly To Your Computer
Besides taking video clips on your digital camera, you can also record them directly to your computer with the
AMCAP program. This program exists on the root directory of installation CD. Browse the installation CD,
you will see Amcap.exe file. Drag this file to your desktop if necessary, you will see the Amcap icon on your
desktop. To recording video clips with AMCAP program, please follow below steps:
1. Turn on your camera, and press the Mode Button to get into [ ] DV mode.
2. Connect your camera to computer with a USB cable
3. Click Amcap icon from desktop
4. Select Devices > Coach Video Camera from the pull-down menu. You should see a live image on
screen. If you cannot see a live image, click Options > Preview from the menu.
5. Click File > Set Capture File from the pull-down menu
6. Enter the filename for the video clip to be captured and click Open button. Make sure to enter avi as the
file extension
7. Keep the default value of 1 MBytes in the Capture file size field and click OK button.
8. Click Capture > Start Capture from the pull-down menu
9. Select OK button to start capturing
10. The time elapsed for video capturing is shown at the bottom of the screen
When video capture is finished, click Capture > Stop Capture from the pull-down menu or press Esc
key on the keyboard
Tip:
The default value of frame rate is 11~15fps at 320x240pixel.. To change the video playback speed, change the
AVI frame rate. Setting it to a larger value results in faster playback, while a small value results in slower
playback