Filter
Top Products
IMAGETEAM™ 4X00 Series Software Development Kit (SDK) User’s Guide 2 - 67
Parameters
pImageDesc
Pointer to a data structure describing the image to to be retrieved.
typedef struct
{
int AspectRatio;
int OffsetX;
int OfsetY;
unsigned int width;
unsigned int height;
int resolution;
FileFormat_t format;
int reserved;
} IntellImgDesc _t;
Aspect Ratio:
Ratio of the bar code height (linear bar codes) or row height (2D bar codes) to the narrow element
width.
OffsetX:
Offset in X direction of center of image, relative to the bar code center, using Intelligent Bar Code
Units (page 2-65).
OffsetY:
Offset in Y direction of the center of the image, relative to the bar code center, using Intelligent Bar
Code Units. Positive Y is above the bar code center, and negative Y is below the center.
width:
Width of image, using Intelligent Bar Code Units.
height:
Height of image, using Intelligent Bar Code Units.
resolution:
The number of pixels to use per Intelligent Bar Code Unit. A higher resolution yields a better quality
image, but also a larger one. The exact value of resolution required is dependent on how far away
the Imager is from the image, and how high the desired image quality.
format:
Format of image. The following formats are supported:
FF_RAW_BINARY Raw data that's converted to 2 gray levels
FF_RAW_GRAY Raw data that's converted to 256 gray levels
oemWaitForDecode
This function causes the engine to start scanning for a decodable symbol. This function does not return until either a symbol is
decoded, or the timeout period has elapsed. If a message was decoded it is returned in this function's parameters.
Result_t oemWaitForDecode (
DWORD dwTimeout,
TCHAR *pchMessage,
TCHAR *pchCodeID,
TCHAR *pchAIMID,
TCHAR *pchSymModifier,
WORD *pnLength,
BOOL (*fpCallBack) (void)
)
Return Values
RESULT_SUCCESS
RESULT_ERR_ENGINEBUSY
RESULT_ERR_PARAMETER
RESULT_ERR_NOTRIGGER
RESULT_ERR_NODECODE
RESULT_ERR_NOIMAGE