Filter
Top Products
90
H4D
Navigating the USER INTERFACE
settings
User Interface
By altering the
User Interface
settings, you can control the way the sensor unit interacts
to suit you and your preferred way of working. It also includes date and time settings.
Userinterfacemenuitems
The user interface menu includes both items and sub-menus as follows:
•
Language
:
The menu system can be displayed in any of seven languages. This menu item
enables you to select your preferred language for the menus.
•
Power Down
:
To help preserve the charge in the battery, you can set the sensor unit to power
down after a specied period of inactivity. Set to a value between 3 and 99 minutes
to establish a time-out (or
Never
to disable the feature). Note, however, that this is a
complete power down mode for the sensor unit, not a standby mode. Half-press the
shutter release (or press the
ON
.
OFF
button on the grip) to reactivate the sensor unit
(which will take a few seconds) if the camera is active or in standby mode (indicated
by a visible logo on the grip display).
Please also note that after 15 minutes of complete inactivity, the whole camera will
turn o automatically to preserve power (indicated by no visible logo on the grip
display), in which case it will have to be restarted by pressing the
ON
button on the
grip as normal.
•
Mark Overexp.
:
This feature helps draw your attention to areas of your images that are overexposed.
When this feature is enabled, the single-image preview display will highlight each
overexposed pixel by ashing it white and black.
Set this item to
On
to enable the feature; set to
O
to disable it.