Filter
Top Products
4 ! :Battery level (actual icon shown depends on the
istateof your camera batteries; seeManaging
Focusbrackets(seethe next section,Usingthe focus
N©TE Ifyou change other camera settings, icons for those
settings will also be displayed across the top and bottom
of the LiveView screen. For more information, see
Advanc_ captur_ se#ings on page 37.
Using the focus brackets
The two brackets inthe middle of the LiveVirtu screen show the
focus region for the picture you are taking. When you pressthe
Shutter button halfway down, the camera usesthisfocus region
to measure and then lock the focus using this region. This is
called F_us L_L
The focus brackets turn green in the LiveView screen and the
AF viewfinder light turns on solid green when the image is in
focus and the camera can lock the focus. However, the focus
brackets turn red and the AF viewfinder light blinks green when
the camera is unable to focus.
Ifthe focus brackets turn red and the AF viewfinder light blinks,
release the Shutter button, re-frame the subject for your picture,
and then press the Shut_r button halfway down again. If the
camera still cannot focus after several tries, the lighting may be
too low, or there may not be enough contrast in the focus
region. Try using FocusLock to focus on an object about the
same distance away but in a higher-contrast region, then point
the camera at the object you were originally trying to
photograph.
26 hp photosmart 730 series user's manual