HP (Hewlett-Packard) EOS30DBODY Digital Camera User Manual


 
69
3 White Balance Auto BracketingN
4
Take the picture.
X
When B/A bracketing has been set, the
three images will be recorded onto the
CF card in the following sequence:
Standard WB, B (blue) bias, and A
(amber) bias. If M/G bracketing has
been set, the sequence will be
Standard WB, M (magenta) bias, and
G (green) bias.
The current drive mode (p.82) will be
used for the shooting.
In step 3, set “BKT” to “±0” (“ ” to
” (1 point)).
White balance bracketing is also
canceled automatically if you set the
<4> switch to <2>, replace the
battery, or replace the CF card.
Canceling White Balance Auto Bracketing
White balance bracketing will not work if the image-recording quality is
set to RAW or RAW+JPEG.
With white balance bracketing, the maximum burst will be lower.
When white balance bracketing is set, the white balance icon will blink on
the LCD panel and the remaining shots will decrease to about 1/3.
Since three images are recorded for one shot, the CF card will take
longer to record the shot.
You can also set white balance correction and AEB shooting in
combination with white balance bracketing. If you set AEB in
combination with white balance bracketing, a total of nine images will be
recorded for a single shot.
BKT” stands for bracketing.