Filter
Top Products
19
The camera
is not
recognized
by the
computer
when it is in
the dock.
(continued)
There is a
functional
problem with
the dock.
Run the dock functionality test by
unplugging the power cord from
the dock, then holding down the
two buttons on the front of the dock
while you plug the power cord
back into the dock, and continue
holding the buttons down. If the
dock lights come on in 5 seconds
(blinking or solid), then the dock is
fully functional.
Cannot
display
images on
the TV.
The TV is not
set to the
correct input
mode.
Check your TV user’s manual to set
the TV to accept video or input
mode.
Audio and
video cables
are switched.
Try switching the audio and video
cables on the back of the TV, DVD
player, or VCR.
Incorrect video
signal format
(NTSC or PAL).
Change the TV configuration
setting in your camera (see your
camera User’s Manual).
Problem Possible cause Solution