HP (Hewlett-Packard) S520 Digital Camera User Manual


 
EN-12
Power the Camera On by Pressing Playback Button
1. Press the 7 button for about 3 seconds to turn the camera on and begin playback.
Lens do not zooms out/in in this playback preview.
The camera will turn off automatically if no operations
are performed for the length of time selected in the
Auto off menu.
2. Press the 7 button again or press the ON/OFF button to
power the camera off, or press the shutter button to enter the
capture mode.
Charging the Battery
The battery is not fully charged at the time of purchase. Fully charge the battery and use
it until it is discharged before you recharge it again. This maximize the performance and
lifetime of the battery.
1. Connect camera to USB-AC adapter with USB cable.
2. Insert the plug into a wall outlet.
The included USB-AC adapter differs depending on the region where you purchased the camera.
User can also charge the battery by connecting camera to computer with USB cable.
Charging time varies according to the ambient temperature and the status of battery.
Status LED Description
Green (blinks slowly) Charging normally
Green Charging finished
Green (blinks quickly) Error
1
2