Filter
Top Products
EN-13
Initial Settings
The language & date/time needs to be set if and when:
The camera is turned on for the first time.
The camera is turned on after leaving the camera without the battery for an
extended period of time.
1. Press the ON/OFF button to turn the power on.
2. Press any button to enter language setup. Select the displayed language with the
4-way navigation control and press the SET button.
3. Select the date format with the left or right side of the 4-way navigation control, and
press the SET button.
4. Select the item’s field with the left or right side of the 4-way navigation control and
adjust the value for the date and time with the up or down side of the 4-way navigation
control.
5. After confirming all settings are correct, press the SET button.
Press the MENU button will enter capture mode with saving the settings.
Setting the Date and Time
When the date and time information is not displayed on the LCD monitor, follow these
steps to set the correct date and time.
1. Press the MODE button, and set the camera
mode to [ ] or [ ]; or press the 7 button.
2. Press the MENU button.
3. Select the [Setup] at the end of the Menu with the
up or down side of the 4-way navigation control,
and press the SET button.
4. Select [Date/Time] with the up or down side of the
4-way navigation control, and press the SET button.
5. Select the date format with the up or down side of the
4-way navigation control, and press the SET button.
Select the item’s field with the left or right side
of the 4-way navigation control and adjust the
value for the date and time with the up or down
side of the navigation control
.
The time is displayed in 24-hour format.
After confirming all settings are correct, press
the SET button.
6. To exit from the [Setup] menu, press the MENU
button.
MENU SET
MENU SET