Filter
Top Products
EN-19
Taking a Panoramic Pictures
Pictures are manually shot, and the camera automatically combines pictures in the
camera.
1. Press the MODE button, and set the camera
mode to [ ], and press the SET button.
2. Select [Panorama Video] with the 4-way navigation
control, and press the SET button.
3. Press the shutter button down fully.
4. Horizontally move your camera to select the
photographic direction, meanwhile the camera
begins to recording.
5. Press the shutter button again to stop recording
when the status bar move to the end. And the
pictures are automatically combined.
You can press the shutter button anytime to
stop recording. And the pictures are
automatically combined.
Panoramic pictures shooting may not be available in the following situations.
a. When shooting has not finished after a certain period of time.
b. When the camera movement speed is too fast.
c. When the camera is not straight relative to the panorama direction.
Setting the LOMO
Creates a lomo-like effect by adding over saturated colors, dark corners, and so on.
1. Press the MODE button, and set the camera mode to [ ], and press the SET
button.
2. Select [LOMO] with the 4-way navigation control, and press the SET button.
3. Press the left side of the navigation control to select the desired option item
with the left or right side of the 4-way navigation control and press the SET button.
LOMO 1: Creates a typical LOMO effect.
LOMO 2: Creates a retro LOMO effect (more sepia tone).
LOMO 3: Creates a retro LOMO effect (greener tone).
LOMO 4: Creates a vivid LOMO effect.
4. Press the down side of the 4-way navigation control to exit.
002140021400214
SCNSCN