Filter
Top Products
English
138
Power turns off
immediately after being
turned on.
Is battery charged?
Charge it.
28
When power is turned
on, the LCD screen will
turn on and off.
The ACCESS/PC
indicator is blinking,
even though nothing is
displayed on LCD
monitor screen.
Power goes off
unexpectedly.
Is Power Save set to “On”?
If the powered DVD video camera/recorder is left for as long as 5
minutes without recording or playback with “Power Save: On”
specified, it will automatically turn off to save battery power. To
restart recording in this case, set the power switch to “OFF” and
then set it to “
!”. You can also specify “Power Save: Off” to stop
automatic power off.
35
Is the DVD video camera/recorder set to the sleep/restart status?
If 30 minutes or more has elapsed with the DVD video camera/
recorder in the sleep/restart status, it will automatically turn off.
Set the power switch to “OFF”, and then power the DVD video
camera/recorder again.
44
Power cannot be turned
off.
Detach the battery or AC adapter/charger once, and then press
the RESET button of DVD video camera/recorder: Reattach a
power supply to DVD video camera/recorder before turning it on
again.
27, 29, 145
Even if the DVD video
camera/recorder is off,
opening the cover will
cause the ACCESS
indicator to blink.
The DVD video camera/recorder will automatically turn on to
recognise a disc: Closing the cover will automatically turn the
DVD video camera/recorder off. 40
Symptom Cause and Correction
Reference
page