Hitachi VM-E55A Camcorder User Manual


 
A power source must be connected before inserting or removing cassettes. Once
connected cassettes can be inserted or removed whether the CAMERA/OFF/VIDEO
switch is on or off.
Inserting a Cassette
1. Slide the EJECT switch in the direction of the arrow. The cassette door opens
automatically.
2. Place the cassette in the cassette holder so that the transparent window faces away
from the body of the camera/recorder and the sprockets toward the body of the
camera/recorder.
3. Push the cassette holder, which is embossed PUSH on the left hand side, until it
"clicks" into place. The camera/recorder automatically closes.
Caution: Be Sure that you push the Cassette holder embossed PUSH to close the holderl
Otherwisel the h0!der wi!! not click into place and the tape may be slack which could lead to
damagel
I Note: !f EJECT 0i TROUBLE flashes inthe viewfinder, remove the cassette and check that 1
the tape is not damaged, iS not slack or no dust adheres to it, etc, After making sure that
there is no abnormality, reinsert th e cassette. !f EJECT o r TROUBL E reappears, see [
!'Troubleshooting" on page 46. l
Removing a Cassette
Slide the EJECT switch in the direction of the arrow. The cassette door opens
automatically. Remove the cassette.
25