Filter
Top Products
General Maintenance - 58 -
Interference on playback picture. When you see the playback picture on
your TV, adjust fine tuning knob on
television set to obtain best picture.
Picture bends at the top of the TV
screen
TV receiver is of older type. It need to
be modified to work properly with
camcorder.
Tape is damaged. Try another
cassette.
Color of your TV screen is too bright,
too faint of change.
TV set has the VIR circuit. Turn it off
during playback.
Date search function does not operate. Slide the CAM/OFF/VIDEO switch to
VIDEO>
Insert the clock battery, set the date
and time, then start recording.
Do not remove the clock battery after
recording.
Do not eject the recorded cassette.
Leave it in the camcorder.
The playback picture moves rapidly
and noise appears. Also sound
speeded up from normal is heard.
The camcorder is set to the double
speed playback mode. Pressing the
playback button to restore the normal
playback mode. The sound also
returns to normal speed.
Noise appears in the picture during
double speed playback, but this does
not indicate a fault.
.
BATTERY CONDITION
Symptom Check Point & Correction
The ( ) indication in the electronic
viewfinder flashes to indicate battery is
discharged.
Try another battery or charge the
battery.
NO OPERATION IS ACCEPTED
Symptom Check Point & Correction
Power is turned on, but no button Remove the
p
ower source and the