Honeywell 4820 Photo Scanner User Manual


 
7 - 28
MSI
<Default All MSI Settings>
MSI
MSI Check Character
Different types of check characters are used with MSI bar codes. You can
program the image scanner to read MSI bar codes with Type 10 check
characters.
Default = Validate Type 10, but Don’t Transmit.
When Check Character is set to Validate Type 10 and Transmit, the image
scanner will only read MSI bar codes printed with the specified type check
character, and will transmit this character at the end of the scanned data.
When Check Character is set to Validate Type 10, but Don’t Transmit, the unit
will only read MSI bar codes printed with the specified type check character, but
will not transmit the check character with the scanned data.
On
* Off
Validate Type 10 and Transmit
* Validate Type 10, but Don’t
Transmit