Filter
Top Products
Rev 3 6 G-113077-002
01/07
English
Backlight Compensation (BLC)
If there is excessive light (for example, a window exists in a
scene), the camera tries to compensate by reducing the
overall exposure, resulting in the areas surrounding the
window becoming too dark. Turn the BLC switch ON to
eliminate the silhouette effect.
Flickerless Mode (FL)
Set the FL switch to ON to remove the flicker in a picture. For
PAL models, the shutter speed is 1/100 second; for NTSC
models, the shutter speed is 1/120 second.
Automatic Gain Control (AGC)
This feature can improve picture quality when the level of
scene illumination is low. When set to OFF, the gain is 11
dB. When set to ON, the gain is 30 dB.
Auto White Balance (AWB)
Auto white balance ensures that color integrity is
maintained. To set the white balance, change the WB1,
WB2, or WB3 switches as shown in the following table.
Auto Trace White Balance (ATW)
This mode covers a range of 2800°K to 8000°K. This mode is
typically used for indoor applications.
WB1 WB2 WB3 AWB Mode
OFF OFF OFF ATW Mode
OFF ON OFF AWC Mode
OFF ON ON One Push Lock
ON OFF OFF Indoor Fixed Mode (3200°K)
ON OFF ON Fluorescent Fixed Mode
(4200°K)
ON ON OFF User Fixed Mode (4700°K)
ON ON ON Outdoor Fixed Mode (6300°K)
EE
AES
OFF
OFF
OFF
OFF
OFF
OFF
ME
AI
BLC
FL
AGC
WB3
WB2
WB1
= ON
= OFF
LEGEND