Filter
Top Products
Rev 3 7 G-113077-002
01/07
Auto White Balance Control (AWC)
This mode covers a wider range of 2000°K to 10000°K and
performs at a faster operating speed than ATW mode. This
mode is typically used for outdoor applications or where
variable lighting conditions exist.
One Push Lock
Press PUSH LOCK on the rear of the camera to calibrate the
white balance for the current scene. This mode is typically
used for scenes with constant lighting conditions.
Synchronization Selection (LL/INT)
This switch selects the synchronization mode of the camera.
When the camera is connected to an AC supply, the Line
lock (LL) mode is used to lock the camera’s frame rate to the
frequency so that each camera in the system is triggered at
the same point on the supply’s AC cycle. The default setting
is LL.
WARNING! The LL/INT switch must be set to INT
when operating from 12 VDC.
L/L
INT
V-PH
-+
PUSH
LOC K
IRIS
LEVEL
V- P H
PWR
VIDEO
L/L
INT
VSD
DC
ME
AI
BLC
FL
AGC
WB3
WB2
WB1
EE
AES
OFF
GND
DC 12V
AC 24V