Filter
Top Products
Document 800-00023 Rev D 21
05/07
Installing the Enclosure Cover
To install the enclosure cover, use the Allen key (supplied) to secure the HD4D dome
enclosure to the base with four #8-32 security screws.
Figure 7 Enclosure Cover Installation
Routine Maintenance
Use regular liquid cleaners to remove dirt and grime from the HD4VC4HR dome.
Caution Do not use harsh or abrasive cleaners which can scratch the
polycarbonate dome and reduce visibility for the camera.
If the camera view is obstructed by scratches, remove the front plate and rotate to find an
unscratched part of the dome.
HD4D dome enclosure
#8-32 security screws (x4)