Filter
Top Products
6 - 46
mined by information encoded in those bar codes. Once the proper num-
ber of codes is reached, the data is output in the order specified in the bar
codes.
Default = On.
Data Matrix Code Page
Data Matrix Code pages define the mapping of character codes to charac-
ters. If the data received does not display with the proper characters, it
may be because the bar code being scanned was created using a code
page that is different from the one the host program is expecting. If this is
the case, scan the bar code below, select the code page with which the bar
codes were created (see Code Page Mapping of Printed Bar Codes on
page A-6), and scan the value and the Save bar code from the
Programming Chart on the inside the back cover of this manual. The data
characters should then appear properly.
Low Density Data Matrix
If you are reading low density Data Matrix codes (codes with little informa-
tion), you can scan the Low Density Codes On bar code below. This set-
ting improves scanner performance when reading these Data Matrix codes.
Default = Low Density Codes Off.
Off
* On
Data Matrix Code Page
Low Density Codes On
* Low Density Codes Off