Filter
Top Products
This Ikelite product is warranted against any manufacturing defects for a
period of one (1) year from the original date of purchase. Defective
products should be returned to Ikelite postage paid. Ikelite will, at its sole
discretion, repair or replace such products, and will return to customer
postage paid. All other claims of any nature are not covered. Except as
mentioned above, no other warranty expressed or implied applies to this
Ikelite product.
Limited Warranty
26
Ikelite Technical Support
Email: ikelite@ikelite.com
Phone 317.923.4523
Fax 317.924.7988
Technical Support
Please read the troubleshooting section of this instruction manual before
contacting Ikelite Technical Support.
EV Manual Controller Use
Since the housing Conversion Circuitry provides real Canon eTTL flash
exposure when used with Ikelite DS series Substrobes, an EV Controller
is not recommended but can be used for manual flash control.
The EV Controller used with Ikelite DS Substrobes has two user
settings. One setting is for strobe selection, the other is for pre-flash “P”
or non pre-flash “ P .” Most cameras use a pre-flash. This means the
EV Controller should be set to the pre-flash “P” position when used with
this camera as a slave. If a manual mode is used that does not emit a
pre-flash, set the EV Controller to the non pre-flash “ P ” position.