Filter
Top Products
4
- Ikelite Digital Housing
- Silicone Lubricant
- Vinyl Port Cover
Package Contents
- Diffuser
- Deflector
- Extra Control Tips
This product has been water pressure tested at the factory and is depth
rated to 200 ft. (60m). Thoroughly inspect and immerse the empty
housing completely in water before installing a camera. If any fogging
occurs or droplets of water enter the housing, do not install a camera.
Clean the housing main o-ring and retest to make sure that it is
watertight. Refer to the Troubleshooting section, page 21.
Please read your Canon camera manual thoroughly to have a full
understanding of each camera function.
If you are new to underwater photography, be sure to read the Photo
Tips section.
Preparation
Width ......................7in. (180mm) including controls
Height ....................5 in. (130mm) including controls
Depth ......................5.4 in. (140mm) including controls and lens port
Weight ....................2.8 lb (1300g) above water
Buoyancy................Slightly negative in saltwater for stability
Specifications