Filter
Top Products
MHD56012 - Edition 8 21
CHAINING INFORMATION
Note:
The 20 ton hoist is similar to the 15 ton hoist but uses one extra idle sheave on the top and bottom hook frames and has eight chain falls.
PARTS ORDERING INFORMATION
Use of other than genuine Ingersoll-Rand replacement parts may
result in decreased hoist performance and may invalidate the
warranty. For prompt service and genuine Ingersoll-Rand parts
provide your nearest Distributor with the following:
1. Complete model number as it appears on the nameplate:
VL2 plus capacity (VL2-XXX).
2. Part number and part name as shown in manual.
3. Quantity required.
The hoist nameplate is located on the gear cover. Example shown
is for a 3 ton VL2 hoist.
For your convenience and future reference it is recommended that
the following information be recorded.
Hoist Model Number:__________________________________
Hoist Serial Number: __________________________________
Date Purchased: ______________________________________
Return Goods Policy
Ingersoll-Rand will not accept any returned goods for warranty
or service work unless prior arrangements have been made and
written authorization has been provided from the location where
the goods were purchased. Hoists returned with opened, bent or
twisted hooks, or without chain and hooks, will not be repaired or
replaced under warranty.
• Continuing improvement and advancement of design may
cause changes to this hoist which are not included in this
manual. Manuals are periodically revised to incorporate
changes. Always check manual edition number on front cover
for latest issue.
• If your hoist has special finish requirements for painted
parts, please specify when ordering.
Disposal
When the life of the hoist has expired, it is recommended that
hoist be disassembled, degreased and parts separated as to
materials so that they may be recycled.
1/2, 1, 1-1/2 and 2 ton Hoists
Single chain fall
3 and 5 ton Hoists
Two chain falls
8 ton Hoist
Three chain falls
10 ton Hoist
Four chain falls
15 ton Hoist
Six chain falls
(Dwg. MHP0037)
(Dwg. MHP0038)
(Dwg. MHP0443) (Dwg. MHP0444)
(Dwg. MHP0039)