Filter
Top Products
11
Insignia 1080p Digital Camcorder
www.insigniaproducts.com
To delete all videos:
1 Turn the Mode Dial to to switch to Video
mode.
2 Press the (playback) button to switch to
Playback mode. The Playback mode main menu
opens.
3 Touch (delete all) to delete all videos.
4 Press (left) or (right) on the navigation
control to highlight , then press the center
navigation control button.
Or,
Touch on the LCD.
A “No Video” message is displayed.
5 Press to return to Video mode.
Taking a photo
To take a photo:
1 Turn on your camcorder.
2 Turn the Mode Dial to to switch to Photo
mode.
3 Aim the lens, and then half-press the photo
shutter button to focus on the subject you want
to capture. When the focus bars in the middle of
the LCD turn green, fully press the photo shutter
button to capture the image.
4 Press the (playback) button to view the
photo. Press again to return to Photo mode.
Taking a close-up photo
Switch to Macro mode to take close-up photos of
subjects between 6 in. ~ 10 in. (15 cm ~ 25 cm)
away.
To take a close-up photo:
1 Turn on your camcorder.
2 Turn the Mode Dial to to switch to Photo
mode.
3 Press (left) on the navigation control to turn
on the Macro function. (macro icon) appears
on the LCD.
4 Aim the lens, and then half-press the photo
shutter button to focus on the subject. When
the focus bars in the middle of the LCD turn
green, fully press the photo shutter button to
capture the image.
Viewing photos
You can view photos stored in internal memory or
on a memory card. If a memory card is inserted, you
can only view photos stored on the memory card.
To view photos stored in internal memory, remove
the memory card.
To view photos:
1 Turn on your camcorder.
2 Turn the Mode dial to to switch to Photo
mode.
3 Press the button to switch to Playback
mode.
4 Press (left) or (right) on the navigation
control or touch or on the LCD to select
a photo.
5 To control playback:
• To view photos in a slideshow, touch
(slideshow) on the LCD to start the slideshow.
Touch it again to stop the slideshow on the
image currently being viewed.
• To display a thumbnail view of photos, press
(up) on the navigation control or touch
(thumbnail) on the LCD. Touch a thumbnail to
view the photo full-screen.
Note
Make sure that you turn off the Macro function when
you are not taking close-up photos.
To do this, press left again on the navigation control.
The macro icon will disappear from the LCD.