Filter
Top Products
14
To use MANUAL white balance:
a) Select MANUAL and press OK button to activate.
b) Press MENU button 2 times to go back to main screen. The manual white balance icon will be
blinking at the top of the LCD screen.
c) Aim camera at white balance board or a white object and press SHUTTER button. White balance
is now set to current ambient light.
d) To reset manual white balance for a new ambient light situation, turn camera off and on to
reactivate blinking manual white balance icon and repeat step c.
14) EXPOSURE VALUE: This setting adjusts the brightness or darkness of the video/photo between
±2 f stops. Setting to positive values will brighten imagery, while negative values will darken imagery.
15) AF MODE: This feature selects the general area in a scene that the cameras uses when
calculating image exposure. Selecting AVERAGE causes camera to adjust exposure to light coming
from the overall area as viewed in LCD. Selecting CENTER will decrease this area towards the
middle of the scene. Selecting SPOT will cause camera to adjust exposure based on light coming
from a very concentrated area in the middle of the scene.
SETTING Menu:
SETTING menu is the same for both video and photo (picture) modes. Press the MENU button and
use UP or DOWN button to highlight SETTING menu icon. Press OK button to enter SETTING sub-
menu. Use the UP or DOWN button to scroll through the sub-menu and press OK button to select
from LCD OFF, TIME SETUP, AUTO POWER OFF, VOLUME, RESET SYSTEM SETTINGS,
FORMAT, LANGUAGE, TV SYSTEM, STAMP, BEEP SOUND, and FIRMWARE VERSION. After
selecting sub-menu, use UP or DOWN to scroll through choices, press OK button to select and press
MENU button to go back to main screen.
1) LCD OFF: This setting turns off LCD screen after a specific time period when 30 sec, 1 min or 3
minutes is selected. Select OFF to deactivate LCD OFF function and keep LCD on. Use this feature
to conserve battery power.
2) TIME SETUP: This setting allows current date and time to be set. With sub-menu item highlighted,
press OK button to enter setting. Press UP or DOWN button to change number and press MENU
button to scroll to next. When done, press OK button to confirm and go back to sub-menu.
3) AUTO POWER OFF: This setting turns off camera after a specific time period when 30 sec, 1 min
or 3 minutes is selected. Select OFF to deactivate AUTO POWER OFF function. Use this feature to
conserve battery power.
4) VOLUME: This setting allows beep sound volume to be turned off when set to 00 or adjusted from
level 01 through 13.
5) RESET SYSTEM SETTINGS: This function allows camera settings to be reset to factory default.
6) FORMAT: This feature allows Micro SD card to be formatted. WARNING, formatting card will
erase all data! Press OK to enter function. Press UP or DOWN button to highlight YES and press
OK to execute format.