Filter
Top Products
10
S
S
t
t
a
a
r
r
t
t
t
t
o
o
U
U
s
s
e
e
Install Battery
1. Open Battery Lid.
2. Install the battery as per the tip drawing on the front of the lithium
battery (see drawing at right) so as to ensure proper installation.
3. Replace the battery lid.
4. Remove the battery if you do not plan to use the camera for a long period of time. period.
period of time.
Charge Battery
1. Power off the camera.
2. Connect the camera to the computer USB port with USB cable to charge the battery.
3. During charging, Busy light is on in green and will be off when the battery is fully charged.
Use SD Card
1. Push the SD card into the slot until it is
completely inserted.
2. Press its tail in slightly to eject the SD
card out.
Switch on/off
1. Switch on: press Power key and the screen will light up.
2. Switch off: press the Power key and the screen will turn off.
If the Auto Switch-off of the camera is set at 60s or 120s, after switch-on, if it is
idle for 1min or 2min, it will automatically power off.