Filter
Top Products
36 EN
MANUAL
PAUSE
WH
OFF
P
L
A
Y
A
M
5S
FOCUS
EXPOSURE AUTO
OFF
OFF
AUTO
AUTO
W. BALANCE
FADER
/ WIPE
P. AE
/ EFFECT
FLASH ADJ.
0
RETURN
4
FADER / WIPE
FADER–BLACK
FADER–B.W
WIPE–SHUTTER
RANDOM
OFF
FADER–WHITE
P
R
?
W
H
B
K
B W
FADER–MOSAIC
SEL.
4
RECORDING
Advanced Features (Cont.)
FADE/WIPE Effects
Use these to spice up the transition from one scene to the next. You can also vary transitions from scene to
scene. Refer to pages 36 – 41 for Fade/Wipe effects and techniques.
Select any one effect from the Fader/Wipe Menu.
1
SELECT OPERATION MODE
First turn the Power Dial to “
M
” while pressing
down the lock button located on the dial,
make sure the LCD monitor is open fully or the
viewfinder is pulled out.
2
ACCESS MANUAL MODE ITEM
MENU
Press the Select Dial.
3
ACCESS FADER/WIPE MENU
Move the pointer and highlight bar to “FADER/
WIPE” by rotating the Select Dial and then
press it. The Fader/Wipe Menu appears.
4
SELECT EFFECT
Move the pointer and highlight bar to the
desired effect by rotating the Select Dial, then
press it.
•The Fader/Wipe Menu disappears and the
effect is reserved. The indicator representing
the selected effect appears.
5
START RECORDING
Press START/STOP to start recording and
activate fade- or wipe- in
OR...
END RECORDING
Press START/STOP to end recording and
activate fade- or wipe- out.
6
TO CANCEL FADE/WIPE EFFECTS
In step 4, move the pointer and highlight bar to
“OFF”. Press the Select Dial.
NOTE:
If certain P.AE/Effects (
੬
pg. 42) are activated,
some Fade/Wipe Effects cannot be used. If you
select a Fade/Wipe Effect that is unusable in the
current situation, the indication blinks.
Lock button
Power Dial
Display
Fader/Wipe MenuManual Mode Item Menu
START/STOP
button
Select Dial