JVC 157WP Security Camera User Manual


 
Getting Mike Power Supply setting
Format /api/param?audio.input(1).powersupply.status
Example of response audio.input(1).powersupply.status=on&200 OK
Interpretation Acquire mike power supply setting. "on" or "off" is returned.
Allowed users admin, operator, user
Setting Mike Power Supply
Format /api/param?audio.input(1).powersupply.status=data
Example /api/param?audio.input(1).powersupply.status=32
Example of response audio.input(1).powersupply.status&200 OK
Interpretation Change mike power supply setting. Specify "on" or "off".
Allowed users admin, operator
11. JVC API for Alarm
These APIs are related to alarm settings. Same functions are shown on the Alarm page of the WEB setting page.
Refer to the instruction manual for details on the Alarm page.
Getting On/Off of Alarm Action
Format /api/param?application.event(Number).status
Example When Getting the on/off status of alarm action No. 1
/api/param?application.event(1).status
Example of response application.event(1).status=on&200 OK
Interpretation Acquire the on/off status of the alarm action for the specified alarm action number. 5 alarm actions,
1 periodic FTP assigned to No.6, 1 pre/post FTP assigned to No.7, 1 SD Card constant recording assigned to
No.8, and 1 SD Card alarm recording assigned to No.10 are available, so alarm action number can be 1 to 8 and
10. Note that alarm numbers are different from the alarm input pin numbers. Either on or off is returned.
Allowed users admin, operator
Setting On/Off of Alarm Action, or Enabling Changes to Alarm Action
Format /api/param?application.event(Number).status=data
Example When setting alarm action No. 1 to off
/api/param?application.event(1).status=off
Example of response application.event(1).status&200 OK
Interpretation Set the alarm action of the specified alarm action number to on/off, or enable changes to the alarm