Filter
Top Products
37
210 or 240, real frame rate is as frame rate setting. If I-Frame interval is not 30, 60, 120, 150, 180, 210 or 240, real frame
rate becomes larger than the setting because I-Frame can not be skipped. If I-Frame setting is 1, all frames become
I-Frame and frame rate becomes 30fps.
The change is saved by the API, encode(2).status=save. If the change is not saved, the setting is restored by reboot.
Allowed users admin, operator
Getting MPEG-4 Priority Setting from VN-V685/686/686B
Format /api/param?encode(2).priority
Example of response encode(2).priority=motion&200 OK
Interpretation Acquire priority of MPEG-4 encoding. "motion" or "quality" is returned.
Allowed users admin, operator, user
Setting MPEG-4 Priority Setting for VN-V685/686/686B
Format /api/param?encode(2).priority=data
Example /api/param?encode(2).priority=motion
Example of response encode(2).priority&202 Accepted(encode(2).status=save)
Interpretation Change priority of MPEG-4. Specify "motion" or "quality". To keep frame rate, select "motion". To
keep image quality, select "quality".
The change is saved by the API, encode(2).status=save. If the change is not saved, the setting is restored by reboot.
Allowed users admin, operator
6.4. Alarm Setting
The APIs below are related to alarm setting. These are equivalent to the features on the Alarm page of the WEB setting
page. Refer to the instruction manual for details on the Alarm page.
Getting On/Off of Alarm Action from VN-V685/686/686B
Format /api/param?application.event(Number).status
Example When Getting the on/off status of alarm action No. 1
/api/param?application.event(1).status
Example of response application.event(1).status=on&200 OK
Interpretation Acquire the on/off status of the alarm action for the specified alarm action number. 5 alarm actions
and 1 periodic FTP assigned to No.6 are available, so alarm action number can be 1 to 6. Note that alarm numbers are
different from the alarm input pin numbers. Either on or off is returned.
Allowed users admin, operator