JVC GCWP10AUS Camcorder User Manual


 
15
Getting Started
The battery is not charged at the time of purchase. Charge before starting to use the
camcorder.
When the battery level is extremely low, the camcorder does not turn on until it is
charged even if it is connected to the computer or AC adapter.
Do not turn the computer off or into the sleep mode during charging (the charging
will stop).
With some types of computers, charging is possible even when the computer is
turned off. Refer to instruction manual of the computer or consult with the
manufacturer of your computer.
You cannot record or play back video/still image/audio while the camcorder is
connected to a computer. You can record or play back video/still image/audio while
the AC adapter is connected to the camcorder.

Indication when using the battery
Fully charged
Medium
Very low
Recharge the battery at an early opportunity.

Indication when using the AC Adapter
(When connected)
When both of the Battery indicator and AC
adapter icons are displayed, the power is
supplied through the both.
(When inoperative)
Charging with the AC Adapter (optional)
Optional accessory: AC-V10LU/JVC
GC-WP10 Connect with the AC adapter using the supplied USB cable.
GC-FM2
Connect the USB connector of this unit with the AC adapter.
(You can connect also using the supplied USB extension cable.)
GC-WP10
GC-FM2