Filter
Top Products
35
SET REMOTE/VCR CODE
SET REMOTE TO OPERATE VCR
1
Turn off the power to the VCR and point the remote
toward the VCR’s infrared sensor. Then, referring to
the VCR CODE LIST on the left, press and hold MBR
SET, and press button (A) and then (B).
•The code is automatically set once you release the
MBR SET button, and the VCR’s power comes on.
OPERATE THE VCR
2
Make sure the VCR’s power is on. Then, while
holding VCR CTL, press the button on the remote for
the desired function. The functions the remote can
control are PLAY, STOP, PAUSE, FF, REW and VCR
REC STBY (you don’t need to press VCR CTL for this
one).
You’re now ready to try Random Assemble Editing.
IMPORTANT
Although the MBR is compatible with JVC VCRs and
those of many other makers, it may not work with yours
or may offer limited functions.
NOTES:
●
If the VCR’s power doesn’t come on in step 1, try
another code from the VCR CODE LIST.
●
Some brands of VCR don’t come on automatically. In
this case, turn the power on manually and try step 2.
●
If the RM-V704U/V700U is not able to control the
VCR, use the controls on the VCR.
MAKE CONNECTIONS
CONNECT TO . . .
1
A
JVC VCR EQUIPPED WITH REMOTE
PAUSE TERMINAL
Connect the editing cable to the Remote PAUSE
terminal.
B
JVC VCR NOT EQUIPPED WITH REMOTE
PAUSE TERMINAL
Connect the editing cable to the R.A.EDIT
connector.
C
NON-JVC VCR WITH NEITHER
Connect the editing cable to the MBR's Pause-In
jack.
All other connections are as shown in the illustration
on page 36.
CONTINUED ON NEXT PAGE
1
2 3
4
5 6
7
8
9
0
VCR BRAND
NAME
BUTTONS
(A) (B)
AKAI 6 2
6 4
7 7
GRUNDIG 1 4
3 4
HITACHI 6 6
6 3
6 7
6 8
3 7
3 8
JVC A
B
C
MITSUBISHI
NEC
9 1
9 6
9 3
PANASONIC 1 3
1 7
1 1
9 4
1 8
FERGUSON 9 7
9 8
3 2
BLAUPUNKT 1 3
VCR BRAND
NAME
BUTTONS
(A) (B)
PHILIPS 1 9
9 5
1 1
9 4
9 1
9 6
1 2
3 3
SANYO 3 6
3 5
SELECO, REX 9 1
9 6
TOSHIBA 6 9
6 1
6 5
6 `
3 9
3 1
SHARP
SONY
1 5
1 `
THOMSON,
TELEFUNKEN,
SABA,
NORDMENDE
9 1
9 6
9 7
3 2
VCR CODE LIST
MBR SET
VCR CTL
Random Assemble Editing
[R.A.Edit]
Create edited videos easily using your
camcorder as the source player. You can select
up to 8 “cuts” for automatic editing, in any
order you like. R.A.Edit is more easily
performed when the MBR (Multi-Brand
Remote, RM-V704U or RM-V700U) is set to
operate with your brand of VCR (see VCR
CODE LIST), but can also be performed by
operating the VCR manually.
•The RM-V704U/V700U is provided with the
GR-AX770 and is available optionally for the
GR-AX670. (RM-V704U or RM-V700U
੬ pg. 38)
RM-V704U or
RM-V700U