Filter
Top Products
EN 45
Troubleshooting
ENGLISH
Warning Indication Meaning / Remedy
High
Exhausted
• Displays the battery remaining power.
• As the battery power comes close to nil, the battery remaining power
indicator blinks. When the battery power is exhausted, power turns
off automatically.
SET TO MANUAL MODE • Appears when you attempt to change “Menu Settings”, “Backlight
Compensation” or “Manual Focus” while in AUTO mode A. (੬ 20)
TAPE END • Appears when the tape ends during recording or playback.
LENS CAP • Appears for 5 seconds after power is turned on if the lens cap is
attached or when it is dark.
SET DATE/TIME! • Appears when the date/time is not set. (੬ 17)
• The built-in clock battery has run out and the previously set date/time
has been erased. Consult your nearest JVC dealer for replacement.
• Appears if a tape is loaded while the Power Switch is set to “REC”.
• Blinks when no tape is loaded.
CHECK TAPE’S ERASE
PROTECTION TAB
• Appears when the erase protection tab is set to “SAVE” while the
Power Switch is set to “REC”.
MEMORY IS FULL
• Appears when the memory card’s memory is full and shooting is not
possible.
UNIT IN SAFEGUARD
MODE REMOVE AND
REATTACH BATTERY
OR DC PLUG
• Error indications 01, 02 or 06.
Remedy: Remove and reattach the power supply or battery.*
UNIT IN SAFEGUARD
MODE EJECT AND
REINSERT TAPE
• Error indications 03 or 04.
Remedy: Eject the cassette and reinsert.*
* The camcorder turns off automatically. Re-check if the indication clears. When it does, you can
resume using the camcorder. If the indication remains, consult your nearest JVC dealer.
GR-D850&870US_EN.indb 45GR-D850&870US_EN.indb 45 11/12/2007 2:48:24 PM11/12/2007 2:48:24 PM