Filter
Top Products
EN57
DUBBING
Dubbing To Or From A VCR
[To use this camcorder as a player]
1
Following the illustration, connect the camcorder and
the VCR. Also refer to pg. 22 and 23.
2
Set the VIDEO/DSC Switch to “VIDEO” (GR-DVX78
only), then set the camcorder’s Power Switch to
“ ” while pressing down the Lock Button
located on the switch, turn on the VCR’s power, and
insert the appropriate cassettes in the camcorder and
the VCR.
3
[For GR-DVX78 owners only]
Set “S/AV INPUT” to “OFF” in the Menu Screen
(੬ pg. 42).
4
Engage the VCR’s AUX and Record-Pause modes.
5
Engage the camcorder’s Play mode to find a spot just
before the edit-in point. Once it is reached, press
4
/6 on the camcorder.
6
Press
4
/6 on the camcorder and engage the VCR’s
Record mode.
7
Engage the VCR’s Record-Pause mode and press
4
/6 on the camcorder.
8
Repeat steps 5 through 7 for additional editing, then
stop the VCR and camcorder when finished.
NOTES:
●
It is recommended to use the AC Adapter as the
power supply instead of the battery pack (
੬
pg. 9).
●
As the camcorder starts to play your footage it will
appear on your TV. This will confirm the connections
and the AUX channel for dubbing purposes.
●
Before you start dubbing, make sure that the
indications do not appear on the connected TV. If they
do, they are being recorded onto the new tape.
To choose whether or not the following displays appear
on the connected TV . . .
•Date/Time
.... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the
Menu Screen (੬ pg. 42, 43).
•Time Code
.... set “TIME CODE” to “ON” or “OFF” in the Menu
Screen (੬
pg. 42, 43).
•
Playback Sound Mode, Tape Speed And Tape Running Displays
.... set “ON SCREEN” to “LCD” or “LCD/TV” in the
Menu Screen (੬ pg. 42, 43). Or, press DISPLAY on
the remote control.
●
You can use Playback Zoom (
੬
pg. 64) or Playback
Special Effects (
੬
pg. 65) in step 6.
Connector
cover**
TV
To AV IN/OUT***
or AV OUT***
To S-VIDEO
of jack box
* Connect when an S-Video cable is not used.
** When connecting the cables, open this cover.
*** GR-DVX78: AV IN/OUT
GR-DVX49/DVX48: AV OUT
****GR-DVX78 only
VCR
To AUDIO,
VIDEO* IN or
OUT****
S-Video
cable
(optional)
Audio/Video cable
[mini-plug to RCA
plug] (provided)
For GR-DVX78 Owners:
To Use This Camcorder As A
Recorder . . .
1. Set the camcorder’s VIDEO/DSC Switch to
“VIDEO”, then set the camcorder’s Power
Switch to “ ” while pressing down the
Lock Button located on the switch.
2. Set “S/AV INPUT” to “ON” and set “REC
MODE” to “SP” or “LP” (੬ pg. 42).
3. Connect the cables as shown in the
illustration and load a cassette to record
on.
4. Press the Recording Start/Stop button to
engage the Record-Pause mode. “
AV. IN
”
appears on the screen.
5. Press the Recording Start/Stop button to
start recording. rotates.
6. Press the Recording Start/Stop button
again to engage the Record-Pause mode.
stops rotating.
NOTES:
●
After dubbing, set “S/AV INPUT” back to
“OFF”.
●
Analog signals can be converted to
digital signals with this procedure.
●
It is also possible to dub from another
camcorder.
To S-VIDEO IN
or OUT****