Filter
Top Products
4 EN
GETTING STARTED
REFRESH indicatorREFRESH switch
Power
This camcorder’s 3-way power supply system lets you
choose the most appropriate source of power.
NOTES:
●
No function is available without power supply.
●
Use only specified power supply.
●
Do not use provided power supply units with other
equipment.
CHARGING THE BATTERY PACK
SUPPLY POWER
1
Connect the charger’s AC power cord to a wall
outlet. The power indicator lights.
ATTACH BATTERY PACK
2
Align the marks and slide the battery pack in the
direction of the arrow until it locks in place.
The CHG. indicator lights.
DETACH BATTERY PACK
3
When charging is completed, the END indicator
lights. Slide the battery pack opposite the direction
of the arrow.
To AC outlet
BATT. PACK CHARGE DISCHARGE
BN-V12U approx. 1 hr. 10 min. approx. 3 hrs. 30 min.
BN-V22U approx. 2 hrs. 10 min. approx. 7 hrs.
BN-V25U approx. 2 hrs. 40 min. approx. 10 hrs.
Approximate recording time (unit: min.)
BATT. PACK
LCD monitor on/ LCD monitor off/
Viewfinder off Viewfinder on
BN-V12U 50 (35) 55 (35)
BN-V22U 110 (75) 120 (80)
BN-V25U 150 (100) 160 (105)
( ): when the video light is on.
USING THE BATTERY PACK
ATTACH BATTERY PACK
1
Hook its top end to the camcorder and push the
battery pack in until it locks in place.
DETACH BATTERY PACK
2
Slide BATT. RELEASE and pull out the battery pack.
**CHARGE MARKER
A charge marker is provided on the
battery pack to help you remember
whether it has been charged or not.
Two colours are provided (red and
black)—you choose which one
means charged and which means
discharged.
CHG. (charge) indicator
Marks
POWER
indicator
END
indicator
Charge marker
**REFRESH
The AC power adapter features a REFRESH function that allows you to fully discharge the battery pack
before recharging.
To discharge the battery . . .
..... attach the battery pack to the adapter as shown in the illustration above. Then push REFRESH. The
REFRESH indicator lights when discharging starts, and goes out when discharging is complete.
2
1
1
Push in.
Hook on.
BATT. RELEASE
ATTENTION:
Before detaching the power source, make
sure that the camcorder’s power is turned
off. Failure to do so can result in a
camcorder malfunction.