Filter
Top Products
44 EN
INDEX
LCD monitor/Viewfinder
10
:
2425
.
12
.
97
MERRY CHR ISTMAS
TAPE END
–
05
MWB
DISP.
REC SP
SEPIA
LENS COVER
FADE
18MIN
T30
1MIN
1/2S
INDEX
PAUSE
8
9
0
1
*
6
*
7
%
*
&
^
*
(
)
q
!
#
$
@
43 5
e
w
2
*
LCD monitor/Viewfinder Indications
1
*
Cassette Warning/Remaining
Tape Time.......................................... ੬ pg. 11
When no cassette is inserted or when Erase
Protection tab is not in the position that allows
recording, the Cassette ( ) Warning blinks.
Otherwise, the Remaining Tape Time is displayed.
2
*
Recording Mode [SP/LP] Indicator......੬ pg. 8
3, 9 PROGRAM AE Indicator................੬ pg. 16
Displayed at 3 for approx. 1 second when the
PROGRAM AE select dial is switched from one
position to another. Then only the indicator
remains at 9.
4 Program Manager Function
Indication .......................................... ੬ pg. 20
Appears when the PROGRAM AE select dial is
set to any position other than AUTO LOCK.
5 Lens Cover Warning .......................... ੬ pg. 11
6
*
Tape Length Display .......................... ੬ pg. 8
7 Zoom Level Indicator ........................ ੬ pg. 14
8 Recording Indicator ........................... ੬ pg. 10
0 Fade-Standby Indicator.......................੬ pg. 20
! Interval Time/Recording
Time Indicator ................................... ੬ pg. 26
@ Record-Standby Mode Indicator .........੬ pg. 10
# Instant Title Display ........................... ੬ pg. 21
$ Date/Time Character Display..............੬ pg. 22
%
*
Battery Pack Remaining Power Indicator
Changes as follows according to the battery pack’s
remaining power level: “ ”.
When the power is almost gone, the indicator
blinks, then the unit shuts off. Replace the
battery pack with a fully charged one.
(Note: The symbol containing 3 darkened
squares — — does not necessarily mean
that the battery pack is fully charged.)
^ Focus Indicator .................................. ੬ pg. 18
& Exposure Level Indicator.....................੬ pg. 17
* White Balance Mode Indicator ...........੬ pg. 23
( Menu Setting Change Indicator ..........੬ pg. 24
) Index Code Marking .......................... ੬ pg. 37
q Clock Warning
Displayed for about 5 seconds if the clock
(lithium) battery is not in place or is exhausted
when power is turned on. Also displayed for
about 5 seconds when clock battery becomes
exhausted while using the camcorder.
For inserting or replacing
the clock battery................................ ੬ pg. 6
w Condensation Warning
When this indication appears, all functions are
disabled. Turn the unit off (without removing the
power source) for a few hours, and when you
turn it on again the indicator should disappear.
e Tape End Display............................... ੬ pg. 11
Appears when the end of the tape is reached
during playback, recording or fast-forward.
* : During recording, pressing DISPLAY lets you remove indications marked with * from the screen.