Filter
Top Products
EN
14
TAPE PLAYBACK
Blank Search
Helps you find where you should start recording in the
middle of a tape to avoid time code interruption
(੬ pg. 13).
1 Load a tape (੬ pg. 9).
2 Set the Power Switch r to “PLAY” while pressing
down the Lock Button e located on the switch.
3 Press BLANK SEARCH ^.
•“BLANK SEARCH”
e appears and the camcorder
automatically starts reverse or forward shuttle search,
then stops at the spot which is about 3 seconds of
tape before the beginning of the detected blank
portion.
To cancel Blank Search midway . . .
..... press 7 4.
NOTES:
● In step 3, if the current position is at a blank portion the
camcorder searches in the reverse direction, and if the
current position is at a recorded portion the camcorder
searches in the forward direction.
● Blank Search does not work if “HEAD CLEANING
REQUIRED. USE CLEANING CASSETTE” has
appeared with the tape.
● If the beginning or end of the tape is reached during
Blank Search, the camcorder stops automatically.
● A blank portion which is shorter than 5 seconds of tape
may not be detected.
● The detected blank portion may be located between
recorded scenes. Before you start recording, make sure
there is no recorded scene after the blank portion.
NOTES:
● If Stop mode continues for 5 minutes when power is
supplied from a battery, the camcorder shuts off
automatically. To turn on again, set the Power Switch r
to “OFF (CHARGE)”, then to “PLAY”.
● The playback picture can be viewed in the LCD monitor,
viewfinder or on a connected TV (੬ pg. 15).
● You can also view the playback picture on the LCD
monitor with it flipped over and pushed against the
camera body.
● LCD monitor/viewfinder indications:
When power is supplied from a battery: the “
”
battery pack remaining power indicator is displayed.
When power is supplied from an AC outlet: “
” does
not appear.
● When a cable is connected to the AV connector, the
sound is not heard from the speaker.
● If still playback continues for more than about 3 minutes,
the camcorder’s Stop mode is automatically engaged.
● When
6
6 is pressed to engage still playback, the
image may not pause immediately while the camcorder
stabilizes the still image.
^
r
e
GR-D22_11-15_EN 25/9/03, 3:28 PM14