JVC GR-D22 Digital Camera User Manual


 
EN
28
SYSTEM CONNECTIONS
To DV 0
DV cable
(optional)
To DV
connector
PC with DV connector
Core filter
Core filter
Connection To A Personal Computer
It is possible to transfer video to a PC with a DV
connector by using software equipped with the PC or
commercially available software.
1 Make sure the camcorder and PC are turned off.
2 Connect the camcorder to your PC using the
appropriate cable as shown in the illustration.
3 Turn the camcorders Power Switch r to PLAY
while pressing down the Lock Button e located on the
switch and turn on the PC.
Refer to the instruction manual of the software on how
to transfer video to the PC.
4 When finished, turn off the PC first, then the
camcorder.
NOTES:
It is recommended to use the AC Adapter as the
power supply instead of the battery pack (
pg. 7).
The date/time information cannot be captured into the
PC.
Refer to the instruction manuals of the PC and Software.
The still images can also be transferred to a PC with a DV
connector-equipped capture board.
When using a DV cable, be sure to use the optional
JVC VC-VDV206U or VC-VDV204U DV cable depend-
ing on the type of DV connector (4 or 6 pins) on the
PC.
The system may not work properly depending on the PC
or capture board you are using.
When using the DV connection refer to manufacturer
instructions of your capture board for drivers installation
and operation instructions.
GR-D22_16-28_EN 25/9/03, 3:32 PM28