JVC GR-D231 Digital Camera User Manual


 
ADVANCED FEATURES
EN 37
MasterPage: Advan_Heading0_Right
EDITING
A Not connected
B To S-VIDEO IN or OUT**
C Yellow to VIDEO IN or OUT
D Red to AUDIO R IN or OUT
E White to AUDIO L IN or OUT
* If your VCR has a SCART connector, use the provided
cable adapter. (The provided cable adapter accepts only
output signals from this camcorder. To use this camcorder
as a recorder, use a commercially available cable
adapter.)
** Connect when your TV/VCR has an S-VIDEO IN/OUT
connector. In this case, it is not necessary to connect the
yellow video cable.
NOTE:
Set the video out select switch of the cable adapter as
required:
Y/C: When connecting to a TV or VCR which accepts Y/C
signals and uses an S-Video cable.
CVBS: When connecting to a TV or VCR which does not
accept Y/C signals and uses an audio/video cable.
To use this camcorder as a player
1 Following the illustrations, connect the camcorder and
the VCR.
2 Start playback on the camcorder. (pg. 17)
3 At the point you want to start dubbing, start recording
on the VCR. (Refer to the VCRs instruction manual.)
4 To stop dubbing, stop recording on the VCR, then stop
playback on the camcorder.
NOTES:
It is recommended to use the AC Adapter as the power
supply instead of the battery pack. (pg. 11)
To choose whether or not the following displays appear on
the connected TV
Date/time
Set DATE/TIME to AUTO, ON or OFF.
(pg. 27, 31) Or, press DISPLAY on the remote control
to turn on/off the date indication.
Time code
Set TIME CODE to OFF or ON. (pg. 27, 31)
Indications other than date/time and time code
Set ON SCREEN to OFF, LCD or LCD/TV.
(pg. 27, 31)
To use this camcorder as a recorder (GR-D231/230
only)
1 Following the illustrations, connect the camcorder and
the VCR.
2 Set REC MODE to SP or LP. (pg. 27)
3 Set the camcorders Power Switch to PLAY.
4 Set S/AV INPUT to A/V.IN or S.IN*.
(pg. 27, 30)
* Select S.IN when using S-VIDEO OUT connector on your
TV/VCR.
5 Press the Recording Start/Stop Button to engage the
Record-Pause mode.
The “” or “” indication appears on the
screen.
6 Start playback on the player.
7 At the point you want to start dubbing, press the
Recording Start/Stop Button to start dubbing. The
indication rotates.
8 Press the Recording Start/Stop Button again to stop
dubbing. The indication stops rotating.
NOTES:
After dubbing, set S/AV INPUT back to OFF.
Analogue signals can be converted to digital signals with
this procedure.
It is also possible to dub from another camcorder.
Dubbing To Or From A VCR
123 4 5
TV
VCR
Open the cover.
S/AV/Editing cable
(provided)
To S/AV
connector
To VCR
Y/C/CVBS
Video Out Select
Switch
Cable Adapter*
mark
A/V
.
IN S
.
IN
GR-D231PAL.book Page 37 Thursday, January 22, 2004 2:57 PM