JVC GR-D74 Digital Camera User Manual


 
34 EN
MasterPage: Heading0_Left
EDITING
A White to AUDIO L IN or OUT
B Red to AUDIO R IN or OUT
C Yellow to VIDEO IN or OUT
D To S-VIDEO IN or OUT*
* Connect when your TV/VCR has an S-VIDEO IN/OUT
connector. In this case, it is not necessary to connect the
yellow video cable.
To use this camcorder as a player
1 Following the illustrations, connect the camcorder and
the VCR. Also refer to page 17.
2 Set the camcorders VIDEO/MEMORY Switch to
VIDEO.
3 Set the camcorders Power Switch to PLAY while
pressing down the Lock Button located on the switch.
4 Turn on the VCRs power.
5 Insert the source cassette in the camcorder.
6 Insert the recording cassette in the VCR.
7 Engage the VCRs AUX and Record-Pause modes.
Refer to the instruction manual for the VCR.
8 Press 4/9 on the camcorder to start playback of the
source tape.
9 At the point you want to start dubbing, engage the
VCRs Record mode.
10 To pause dubbing, engage the VCRs Record-
Pause mode and press 4/9 on the camcorder.
11 Repeat steps 8 10 for additional editing. Stop the
VCR and camcorder.
NOTES:
It is recommended to use the AC Adapter as the power
supply instead of the battery pack. (pg. 7)
As the camcorder starts to play your footage, it will appear
on your TV. This will confirm the connections and the AUX
channel for dubbing purposes.
Before you start dubbing, make sure that the indications do
not appear on the connected TV. If they do, they are being
recorded onto the new tape.
To choose whether or not the following displays appear
on the connected TV
Date/time
Set DATE/TIME to AUTO, ON or OFF.
(pg. 25, 28) Or, press DISPLAY on the remote control
to turn on/off the date indication.
Time code
Set TIME CODE to OFF or ON. (pg. 25, 28)
Indications other than date/time and time code
Set ON SCREEN to OFF, LCD or LCD/TV.
(pg. 25, 28)
To use this camcorder as a recorder
1) Perform steps 1 to 3 in To use this camcorder as a
player.
2) Set S/AV INPUT to ON. (pg. 25, 28)
3) Set REC MODE to SP or LP. (pg. 25, 26)
4) Insert the recording cassette in this camcorder.
5) Press the Recording Start/Stop Button to engage the
Record-Pause mode. The “” indication appears
on the screen.
6) Press the Recording Start/Stop Button to start
recording. The T indication rotates.
7) Press the Recording Start/Stop Button again to stop
recording. The T indication stops rotating.
NOTES:
After dubbing, set S/AV INPUT back to OFF.
Analog signals can be converted to digital signals with this
procedure.
It is also possible to dub from another camcorder.
Dubbing To Or From A VCR
1234
TV
VCR
Audio/Video
cable
(provided)
To AV To S
S-Video cable
(optional)
A/V
.
IN
GR-D94US.book Page 34 Monday, November 17, 2003 2:12 PM