Filter
Top Products
10 EN
GETTING STARTED
(Cont.)
Indoor Use
When using the camcorder indoors, you can use
the AC Adapter instead of a battery.
1
SUPPLY POWER TO ADAPTER
Plug the AC Adapter/Charger's power cord in
to an AC outlet.
2
SUPPLY POWER TO CAMCORDER
Connect the AC Adapter to the camcorder.
DC-IN
A
B
C
a
b
c
d
D
Using The CAM Stand
During Playback
If you leave the camcorder's power on for a long
time while using it on a table top etc., the
camcorder's surface may become hot. Attach it to
the CAM Stand and play back.
During Recording
It is recommended to use the CAM Stand while
shooting from a table top or any other flat surface.
This provides stability to the camcorder.
1
SUPPLY POWER
Plug the DC cord into the camcorder.
2
ATTACH TO CAM STAND
Line up
A
with
a
,
B
with
b
,
C
with
c
, and
D
with
d
. Slide the camcorder in the
direction of the arrow.
•To detach the camcorder, slide it in the
opposite direction of the arrow.
Power cord
AC Power
Adapter/Charger
DC cord
Core Filter
Connector is under
this cover
CAM Stand
Lens
Bottom of the camcorder
NOTES:
●
When using the provided DC cord, make sure
you connect the end of the cable with the core
filter to the camcorder. The core filter improves
performance of equipment.
●
When using the AC Power Adapter/Charger, the
“Battery Low” indicator (
੬
pg. 75) may appear.
This is not a malfunction.
To AC outlet