Filter
Top Products
EN67
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
31.
The rear of the LCD monitor
is hot.
32.
The indicators and the image
colour on the LCD monitor
are not clear.
33.
The LCD monitor or
viewfinder indications blink.
34.
Coloured bright spots appear
all over the LCD monitor or
the viewfinder.
35.
During recording, sound
cannot be heard.
36.
Play, Rewind and Fast-
Forward functions do not
work.
37.
The tape is moving, but
there is no picture.
38.
The LCD monitor indications
are distorted.
31.
•The light used to illuminate
the LCD monitor causes it to
become hot.
32.
•This may occur when the
surface or the edge of the LCD
monitor is pressed.
33.
•Certain Fade/Wipe effects,
certain modes of Programme
AE with special effects, “DIS”
and other functions that
cannot be used together are
selected at the same time.
34.
•The LCD monitor and the
viewfinder are made with
high-precision technology.
However, black spots or
bright spots of light (red, green
or blue) may appear
constantly on the LCD
monitor or the viewfinder.
These spots are not recorded
on the tape. This is not due to
any defect of the unit.
(Effective dots: more than
99.99 %)
35.
•The optional headphones are
not connected to the
headphones connector.
•The sound volume of the
headphones connector was
not adjusted appropriately.
The sound volume at this
point is the same as the level
it was adjusted to during
playback.
36.
•The Power Switch is not set to
“ ”.
37.
• Your TV has AV input
terminals, but is not set to its
VIDEO mode.
•The cassette’s cover is open.
38.
•During playback of the
unrecorded portion, High-
speed Search and still
playback, LCD monitor
indications appear distorted.
This is not a defect.
31.
•Close the LCD monitor to turn
it off or set the Power Switch
to “OFF”, and let the unit cool
down.
32.
————
33.
•Re-read the sections covering
Fade/Wipe effects, Pro-
gramme AE with special
effects and “DIS” (੬ pg. 29,
31–35).
34.
————
35.
•Connect the optional
headphones to the head-
phones connector (੬ pg. 62).
•Adjust the sound volume
during playback (੬ pg. 42).
36.
•Set the Power Switch to
“ ” (੬ pg. 42).
37.
•Set the TV to the mode or
channel appropriate for video
playback (੬ pg. 46, 47).
•Close the cassette’s cover
(੬ pg. 9).
38.
————
CONTINUED ON NEXT PAGE