Filter
Top Products
0
When the battery life is reached, the recording time becomes shorter even if the battery
pack is fully charged. (Replace the battery pack with a new one.)
Troubleshooting
If you encounter problems with this unit, check the following before requesting service.
1
Refer to “Trouble” below.
2
Refer to the “Troubleshooting” section in the “Detailed User Guide”.
If you have difficulties operating the unit, refer to the detailed descriptions in the “Detailed
User Guide”.
0
http://manual.jvc.co.jp/index.html/
3
Refer to the FAQ of new products on JVC’s website.
0
http://www.jvc.com/
4
This unit is a microcomputer-controlled device. Electrostatic discharge, external
noise and interference (from a TV, a radio, etc.) might prevent it from functioning
properly.
In such a case, reset the unit.
A
Turn off the power. (Close the LCD monitor.)
B
Remove the AC adapter and battery pack from this unit, reattach them, open
the LCD monitor and this unit powers on automatically.
5
If the above do not solve the problem, consult your nearest JVC dealer or JVC
service center.
Trouble
Trouble
Action Page
Power
POWER/CHARGE
lamp starts blinking
when the monitor is
closed.
0
The battery pack is being charged.
8
Recording
Recording cannot be
performed.
0
Check the A / B button.
14
0
Set to the recording mode by tapping the
R button on the screen.
16
Recording stops
automatically.
0
Turn off this unit, wait for a while, and turn
it on again. (This unit stops automatically
to protect the circuit when the
temperature rises.)
-
0
Recording stops automatically after 12
hours of continuous recording.
-
Playback
Sound or video is
interrupted.
0
Sometimes playback is interrupted at the
connecting section between two scenes.
This is not a malfunction.
-
26
For more information, refer to the Detailed User Guide
http://manual.jvc.co.jp/index.html/