Filter
Top Products
26 EN
VIDEO RECORDING & PLAYBACK
MasterPage: Body_Left
A White to AUDIO L IN**
B Red to AUDIO R IN**
C Yellow to VIDEO IN (Connect when your TV/
VCR has only A/V input connectors.)
D Black to S-VIDEO IN (Connect when your TV/
VCR has S-VIDEO IN and A/V input
connectors. In this case, it is not necessary to
connect the yellow video cable.)
* If your TV/VCR has a SCART connector, use the
provided cable adapter.
** Not required for watching still images only.
NOTES:
● The S-Video cable is optional. Be sure to use
the YTU94146A S-Video cable. Consult the
JVC Service Centre described on the sheet
included in the package for details on its
availability. Make sure to connect the end with
a core filter to the camera. The core filter
reduces interference.
● It is recommended to use the AC adapter as
the power supply instead of the battery pack.
(੬ pg. 16)
● Set the video out select switch of the cable
adapter as required:
Y/C: When connecting to a TV or VCR which
accepts Y/C signals and uses an S-Video cable.
CVBS: When connecting to a TV or VCR which
does not accept Y/C signals and uses a video
cable.
● Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camera is turned on.
Playback on a TV
1 Make sure all units are turned off.
2 Connect the camera to a TV or VCR as
shown in the illustration.
If using a VCR, go to step 3.
If not, go to step 4.
3 Connect the VCR output to the TV input,
referring to your VCR’s instruction manual.
4 Turn on the camera, the VCR and the TV.
5 Set the VCR to its AUX input mode, and set
the TV to its VIDEO mode.
6 Start playback on the camera. (੬ pg. 24)
To choose whether or not the following
displays appear on the connected TV
● Date/Time
Set [DATE/TIME] to [AUTO], [ON] or [OFF].
(੬ pg. 48, 49)
● Counter
Set [SCENE COUNTER] to [ON] or [OFF].
(੬ pg. 48, 49)
(Pressing INFO/ button also turns on/off the
displays.)
Dubbing to a VCR (or DVD Recorder)
The following explains how to dub to a VCR.
When dubbing to a DVD recorder, refer to its
instruction manual.
1 Perform steps 1 to 6 above.
2 At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR’s
instruction manual.)
3 To stop dubbing, stop recording on the VCR,
then stop playback on the camera.
Connecting to a TV or VCR
Open the
cover.
To S connector
AV Cable
(provided)
S Cable
(optional)
To AV connector
Cable Adapter*
“Y/C” / “CVBS”
Video Out Select
Switch
To TV or VCR
M5E3PAL_04Basic.fm Page 26 Tuesday, June 14, 2005 2:40 PM