Filter
Top Products
Other problems
The lamp does not flash
during battery pack
charging.
Check the remaining battery power. (When the
battery pack is fully charged, the lamp does not
flash.)
P.10
When charging in either a hot or cold
environment, ensure that battery is being
charged within the permitted temperature
range. (Otherwise, charging may stop to
protect the battery pack.)
P.6
The slider and operation
buttons do not work.
Remove any gloves. -
Touch the slider and buttons with your fingers
to operate. (They do not function if you touch
them with your fingernails or pen tips.)
-
This unit heats up.
This is not a malfunction. (This unit may
become warm when used for a long time.)
-
Warning Indications
Warning Indications Action Page
RECORDING FAILURE
Turn off and on this unit again.
Set “REC MEDIA FOR VIDEO” in the media
settings menu to “SD”. (Records on the microSD
card.)
Make use of a file recorded with this unit. (Files
recorded with other devices may not be playable. If
the file was recorded with this unit, then it is
corrupted.)
P.23
P.13
-
UNSUPPORTED SCENE!
(Video)
UNSUPPORTED FILE!
(Still image)
Make use of a file recorded with this unit. (Files
recorded with other devices may not be playable. If
the file was recorded with this unit, then it is
corrupted.)
-
DATA RECORDED IS
TOO LITTLE UNABLE TO
SAVE
If a video recording is stopped with the actual
recording time displayed at “0:00:00:17” and below,
the video cannot be saved.
-
CAMERA TEMPERATURE
IS TOO COLD KEEP
CAMERA POWER ON
PLEASE WAIT
Leave this unit turned on for a while.
If the warning still does not disappear, turn off the
power and move the unit to a warm place while
taking care to avoid a sudden temperature change.
Turn on the power again after a while.
-
For more information, refer to the Detailed User Guide
http://manual.jvc.co.jp/index.html/
27
Getting StartedRecordingPlaybackCopying
Further
Information