Filter
Top Products
61
ENGLISH
FURTHER
INFORMATION
Menus
Settings: [ ] = Factory-preset
& QUICK RESTART
Enables the camcorder to start
up quickly when you turn off the
camcorder and then on again
within 5 minutes by closing and
opening the LCD monitor.
OFF : Deactivates the function.
[ON]:
If the LCD monitor is opened again within 5
minutes, the camcorder starts quickly. The power
consumption used for the 5 minute period after the LCD
monitor is closed is approximately 1/3 that used during
recording. This enables you to save more power than
leaving the power on.
] REMOTE
Turns on/off reception of the
operation signal from the remote
control.
OFF: Does not receive the signal from the remote
control.
[ON]:
Enables operation with the remote control.
UPDATE
Updates and improves the system
software.
YES: Performs this function.
[NO]
: Cancels this function.
NOTE
• The built-in hard disk of the camcorder may not be
protected even if the setting is [ON].
• When recording/playback stops even if the
camcorder is not dropped, set the setting to [OFF] or
set [REC MEDIA FOR VIDEO] to [SD]. (Z p. 62)
Z FACTORY PRESET
Returns all the camcorder settings
to their default values.
YES: Performs the function.
NO
: Returns to the menu screen without executing
reset.
CONNECTION SETTINGS
Select [CONNECTION SETTINGS], then select sub-menus.
% DISPLAY ON TV
Displays camcorder’s on-screen
display on A TV screen.
[OFF]: Does not display on TV.
ON:
Displays on TV.
VIDEO OUTPUT
Sets the aspect (16:9/4:3) to the
screen of the connected television
when outputting videos from the AV
connector.
4:3 / [16:9]
Changing the Menu Settings (Continued)