Filter
Top Products
EN 63
Indication Meaning
੬
NUMBER OF FOLDERS
OVERFLOW
● Appears when the number of folders exceeds the limit for
file copy/move operation.
–
MEMORY CARD ERROR!
REINSERT CARD OR CHANGE
CARD.
● Appears when the camera does not recognize the loaded
SD card. Remove the card once and insert it again or
replace with another card.
15
FILE SYSTEM MAY HAVE
PROBLEM. FORMAT IS
RECOMMENDED AFTER
COPYING WANTED DATA.
● The file system of the recording medium may have a
problem. It is recommended to copy the data for backup
purposes, then format the medium.
39
VIDEO MANAGEMENT FILE IS
BROKEN. TO RECORD/
PLAYBACK VIDEO,
RECOVERY IS REQUIRED.
RECOVER?
● The video management file is broken. Recovery is
required to record or play back video files. Press / to
select [YES], then press 49 to recover the video
management file. If the desired video file is not displayed
on the video index screen in spite of the file recovery, the
file has been moved to the [EXTMOV] folder. Press the
REC/SNAP button on the index screen to display [MPG],
and then select the desired file.
29
NO VIDEO MANAGEMENT FILE
VIDEO FILES HAVE BEEN
MOVED TO MPEG FOLDER
● The data cannot be recorded properly, or the video
management file has been deleted or cannot be found.
Video files have been moved to MPEG (EXTMOV) folder.
29
CAN NOT READ EVENT
INFORMATION
● Appears when the event information cannot be read.
–
PLAYLIST’S MANAGEMENT
INFORMATION IS BROKEN.
REMAKE PLAYLIST AGAIN.
● The management information of the playlist is broken.
Create the playlist again.
42
NO REGISTERED SCENES IN
PLAYLIST. SOME OF SCENES
MAY NOT BE PLAYED BACK.
● The video files registered in the playlist do not exist. Some
of the scenes may not be played back.
–
REGISTERED SCENES IN
PLAYLIST IS EMPTY. THIS
PLAYLIST WILL BE DELETED.
● There are no scenes registered in the playlist. The playlist
will be deleted.
–
CAMERA TEMPERATURE IS
GOING UP. TURN CAMERA
OFF, PLEASE WAIT.
● The temperature of the camera is too high. Turn off the
power, then wait for a while.
–
CAMERA TEMPERATURE IS
TOO LOW. KEEP CAMERA
POWER ON, PLEASE WAIT.
● The temperature of the camera is too low. Keep the power
on and wait for a while.
–
FURTHER INFORMATION
M6E3US.book Page 63 Wednesday, June 7, 2006 9:35 AM