JVC GR-DVL725 Camcorder User Manual


 
48
EN
MDOESOUND
MDOE
12
BIT
ROSYNCH
ODEREC M
COPY
STEREO
SOUND
1
SP
OFF
OFF
NRETUR
O.O
RE NEON SC LCD/ TV
UAOT
IMETDATE /
T I ME CODE
FFO
NRETUR
BEEP
MELODY
NO
TALLY
SIDE LED NO
DEMO MODE NO
CAM ERSET
NRETUR
MSYSTE
AYDISPL
VIDEO SOUND MODE
MODE
MODE
12
BIT
NPUT
S/
AV I
SYNC ROH
REC
END
COPY
NPUT
S/
AV I
For Playback Menu
The following procedure applies to all except Synchro
Comp (
pg. 62).
1 Set the VIDEO/MEMORY Switch to “VIDEO”,
then set the Power Switch to “PLAY” while pressing
down the Lock Button located on the switch.
2 Press the MENU/BRIGHT wheel in. The Menu
Screen appears.
3 Rotate the MENU/BRIGHT wheel to select the
desired function menu, and press it. The selected
function menu appears.
4 Rotate the MENU/BRIGHT wheel to select the
desired function, and press it to display the Sub Menu.
5 Rotate the MENU/BRIGHT wheel to select the
desired parameter and press it. Selection is complete.
6 Rotate the MENU/BRIGHT wheel to select “
RETURN” and press it twice to close the Menu Screen.
Display
Power Switch
MENU/BRIGHT Wheel
Recording Start/Stop
Button
NOTES:
The date indication can also be turned on/off by
pressing DISPLAY on the remote control (provided with
GR-DVL820 only).
“REC MODE” can be set when the Power Switch is set
to “PLAY” or “
MANUAL
” ( pg. 13, 45).
When “S/AV INPUT” is set to “ON”, camcorder playback
cannot be viewed on the AV output.
Menu Screen Explanations
pg. 49.
pg. 49.
pg. 62.
Allows you to set the tape
recording mode (SP or LP)
depending on your preference
(
pg. 13).
It is recommended you use
“REC MODE” in the “
VIDEO” Menu when using this
camcorder as a recorder during
dubbing ( pg. 50, 51).
ON: Enables dubbing of images
recorded on a tape to a memory
card (
pg. 52).
OFF: Enables snapshots to be
taken during tape playback.
ON: Enables audio/video signal
input from the AV and S-VIDEO
connectors (
pg. 50).
OFF: Enables audio/video signal
output to a TV, VCR, etc. via the
AV and S-VIDEO connectors
(
pg. 22, 50).
SOUND MODE
12BIT MODE
SYNCHRO
REC MODE
COPY
S/AV INPUT
(GR-DVL820
only)
SYSTEM
DISPLAY
VIDEO
USING MENUS FOR DETAILED ADJUSTMENT
(cont.)
Lock Button
* Actual menus differ by model and may appear
differently from these illustrations. Some menu items
may be unavailable on your model.
VIDEO/MEMORY Switch
(Open the LCD monitor to access
this switch.)
Each setting is linked with “ DISPLAY” or
SYSTEM”, which appears when the Power
Switch is set to “
MANUAL
” ( pg. 46, 47).
The parameters are the same as in the
description on pg. 46, 47.