JVC GR-DVL725 Camcorder User Manual


 
EN
69
CONTINUED ON NEXT PAGE
The cassette is in the wrong
position.
The battery’s charge is low.
The memory card is in the wrong
position.
The Squeeze mode is selected.
The light source or the subject does
not include white. Or there are
various different light sources
behind the subject.
The Sepia or Monotone mode is
activated.
Shooting was performed under
backlit conditions.
The subject is too bright.
10X optical zoom is selected.
The VIDEO/MEMORY Switch is set
to “MEMORY”.
The Sepia or Monotone mode is
activated.
When shooting in the dark, the unit
becomes highly sensitive to light
and the image takes on an effect
similar to Slow Shutter.
The Sepia or Monotone mode is
activated.
• Set it in the right position
(
pg. 12).
• Install a fully charged battery
(
pg. 8, 9).
• Set it in the right position
(
pg. 14).
• Disengage the Squeeze mode
(
pg. 46).
• Find a white subject and compose
your shot so that it also appears in
the frame (
pg. 26, 40).
• Turn off Sepia and Monotone
(
pg. 36, 37).
• Press the BACKLIGHT Button
(
pg. 42).
• Set “PROGRAM AE” to
“SPOTLIGHT” in the Menu Screen
(
pg. 36).
• Set “ZOOM” to “40X” or “700X” in
the Menu Screen (
pg. 45).
• Set the VIDEO/MEMORY Switch to
“VIDEO” (
pg. 17, 18).
• Turn off Sepia and Monotone
(
pg. 36, 37).
• If you want the lighting to look
more natural, set GAIN UP to
“AGC” or “OFF” in the Menu
Screen (
pg. 45).
• Turn off Sepia or Monotone before
setting White Balance (
pg. 37,
43).
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
6 The cassette will not load
properly.
7 The memory card will not
load properly.
8 Snapshot mode cannot be
used.
9 The color of Snapshot looks
strange.
0 The image taken using
Snapshot is too dark.
! The image taken using
Snapshot is too bright.
@ Digital Zoom does not work.
# The Black & White Fader
does not work.
$ Even when Slow Shutter is
not selected, the image
looks like it is activated.
% White Balance cannot be
activated.