Filter
Top Products
50
EN
MDOESOUND
MDOE
12
BIT
ROSYNCH
ODEREC M
COPY
STEREO–
SOUND
1
SP
OFF
–
–
–
–
OFF–
NRETUR
O.O
RE NEON SC LCD/ TV
UAOT
IMETDATE /
T I ME CODE
–
–
– FFO
NRETUR
BEEP
MELODY
NO
TALLY
–
–
SIDE LED – NO
DEMO MODE – NO
CAM ERSET
NRETUR
MSYSTE
AYDISPL
VIDEO SOUND MODE
MODE
MODE
12
BIT
NPUT
S/
AV I
SYNC ROH
REC
END
COPY
NPUT
S/
AV I
For Playback Menu
The following procedure applies to all except Synchro
Comp (
੬ pg. 62).
1 Set the VIDEO/MEMORY Switch to “VIDEO”,
then set the Power Switch to “PLAY” while pressing
down the Lock Button located on the switch.
2 Press the MENU/BRIGHT wheel in. The Menu
Screen appears.
3 Rotate the MENU/BRIGHT wheel to select the
desired function menu, and press it. The selected
function menu appears.
4 Rotate the MENU/BRIGHT wheel to select the
desired function, and press it to display the Sub Menu.
5 Rotate the MENU/BRIGHT wheel to select the
desired parameter and press it. Selection is complete.
6 Rotate the MENU/BRIGHT wheel to select “
RETURN” and press it twice to close the Menu Screen.
Display
Power Switch
MENU/BRIGHT Wheel
Recording Start/Stop
Button
NOTES:
● The date indication can also be turned on/off by
pressing DISPLAY on the remote control.
● “REC MODE” can be set when the Power Switch is set
to “PLAY” or “
MANUAL
” (੬ pg. 13, 47).
● When “S/AV INPUT” is set to “ON”, camcorder playback
cannot be viewed on the AV output.
Menu Screen Explanations
੬ pg. 51.
੬ pg. 51.
੬ pg. 62.
Allows you to set the tape
recording mode (SP or LP)
depending on your preference
(
੬ pg. 13).
It is recommended you use
“REC MODE” in the “
VIDEO” Menu when using this
camcorder as a recorder during
dubbing (੬ pg. 52, 53).
ON: Enables dubbing of images
recorded on a tape to a memory
card (
੬
pg. 32).
OFF: Enables snapshots to be
taken during tape playback.
ON: Enables audio/video signal
input from the AV and S-VIDEO
connectors (
੬
pg. 52).
OFF: Enables audio/video signal
output to a TV, VCR, etc. via the
AV and S-VIDEO connectors
(
੬
pg. 22, 52).
SOUND MODE
12BIT MODE
SYNCHRO
REC MODE
COPY
S/AV INPUT
SYSTEM
DISPLAY
VIDEO
USING MENUS FOR DETAILED ADJUSTMENT
(cont.)
Lock Button
VIDEO/MEMORY Switch
(Open the LCD monitor to access
this switch.)
Each setting is linked with “ DISPLAY” or
“
SYSTEM”, which appears when the Power
Switch is set to “
MANUAL
” (੬ pg. 48, 49).
The parameters are the same as in the
description on pg. 48, 49.