JVC GR-DVP7U Camcorder User Manual


 
EN 15
Master Page: Right
GR-DVP7U_09-17.fm Page 15
The date/time is recorded onto the tape at all times,
but its display can be turned on or off during
playback. ( pg. 38, 48)
1 Set the Power Switch to “M” while pressing down
the Lock Button located on the switch.
2 Open the LCD monitor fully, or pull out the
viewfinder fully.
3 Press MENU. The Menu Screen appears.
4 Press + or to select “n DISPLAY”, and press
SET/SELECT. The DISPLAY Menu appears.
5 Press + or to select “CLOCK ADJ.”, and press
SET/SELECT. The parameter for “Month” is
highlighted.
6 Press + or to input the month, and press SET/
SELECT. Repeat to input the day, year, hour and
minute.
7 Press + or to select “BRETURN”, and press SET/
SELECT twice. The Menu Screen closes.
Built-in Clock’s Rechargeable Lithium Battery
To store the date/time in memory, the clock’s
rechargeable lithium battery is integrated in the
camcorder. While the camcorder is connected to an
AC outlet using the AC Power Adapter/Charger, or
while the battery pack attached to the camcorder
continues to supply power, the clock’s rechargeable
lithium battery is always charged. However, if the
camcorder is not used for approx. 3 months, the
clock’s lithium battery will become discharged and
the date/time stored in memory will be lost. When
this occurs, first connect the camcorder to an AC
outlet using the AC Power Adapter/Charger for over
24 hours to charge the clock’s rechargeable lithium
battery. Then perform the date/time setting before
using the camcorder.
Note that the camcorder can be used without setting
the date/time.
NOTE:
Even if you select “CLOCK ADJ.”, if the parameter is
not highlighted, the camcorder’s internal clock
continues to operate. Once you move the highlight
bar to the first date/time parameter (month), the
clock stops. When you finish setting the minute and
press SET/SELECT, the date and time begin
operation from the date and time you have just set.
Date/Time Settings
POWER Lamp
Power Switch
Lock Button
MENU Button
SET/SELECT Button
+, – Button
OF
F
FADER
/ W I PE
AM AEPROGR
ACAMER
LMANUA
MSYSTE
DSC
END
AYDISPL
C
AN E
W. BAL
RE NEON SC
LCD/TV
UAOT
IMETDATE/
T I ME CODE
CLOCK
ADJ .
–FFO
NRETUR
25'C02
ED
53
PM0
:
CLOCK
ADJ .
25'C 02
E
D
53
PM0
:
GR-DVP7U_09-17.fm Page 15 Wednesday, February 27, 2002 5:37 PM