Filter
Top Products
10 EN
Master Page: Left
How To Use The Pro Pad
When using an optional XLR microphone, attach the
Pro pad to the camcorder.
1 Mount the Pro pad on the Shoe.
2 Tighten the screw firmly using coins etc.
3 Open the connector cover and connect the audio
cable of the Pro pad to the microphone
connector.
4 Mount the exterior microphone and tighten the
screw.
5 Connect the audio cable of the microphone to
the XLR1 input connector.
6 Set the MIC IN switch to “XLR1” position.
When using an interviewing microphone at the
same time
Microphone for interviewing should be connected
to the XLR2 input connector of the Pro pad.
By setting the MIC IN switch, input method can be
selected as below.
MIC IN switch
XLR 1: Input only from the fixed exterior
microphone.
XLR 1 XLR 2: Input both from the fixed exterior
microphone and interviewing microphone.
When detaching the microphone
Press the PUSH button of the Pro pad to remove the
audio cable of the exterior microphone. Then,
loosen the screw to detach the microphone.
NOTE:
The Pro pad does not have the function to supply
power to the exterior microphone.
XLR 2 XLR 1
PUSH PUSH
XLR 2
XLR 1
XLR 1
MIC IN
JY-HD10US.book Page 10 Tuesday, April 22, 2003 8:18 AM