Filter
Top Products
EN 47
Master Page: Right
NOTE:
If you are using the viewfinder, you should already
have performed “Viewfinder Adjustment”
(੬ pg. 15).
1 Set the Power Switch to “M” while pressing down
the Lock Button located on the switch.
2 Press FOCUS. The manual focus indicator
appears.
3 To focus on a further subject, rotate the Manual
Focus Ring counterclockwise.
To focus on a nearer subject, rotate the Manual
Focus Ring clockwise.
To reset to Auto Focus...
Press FOCUS or set the Power Switch to “A”.
NOTES:
● Be sure to focus the lens in the maximum
telephoto position when you use the Manual
Focus mode. If you focus in on a subject in the
wide-angle position, sharply focused images
cannot be obtained when zoomed up because the
depth-of-field is reduced at longer focal lengths.
● When the focus level cannot be adjusted any
further or closer, “ ” or “ ” will blink.
Zooming manually using the Zoom Ring enables
controlling the shooting angle or zooming speed to
your preference.
1 Set the Power Switch to “M” while pressing down
the Lock Button located on the switch.
2 Zoom In
Rotate the Zoom Ring counterclockwise.
Zoom Out
Rotate the Zoom Ring clockwise.
NOTE:
Digital zoom cannot be used when the Recording
Mode Switch is set to “HD” or “MEMORY”.
(੬ pg. 16)
Manual Focus
Lock Button
Power Switch
FOCUS Button
Manual Focus
Ring
Zoom Ring
While focusing on a
further subject
While focusing on a nearer
subject
Manual Zooming
ADVANCED FEATURES
JY-HD10US.book Page 47 Tuesday, April 22, 2003 8:18 AM